Telephone：139-0520-6681
Fax：0516-85653092
Email：klin9999@126.com
Address：Dapeng Industrial Park, Tongshan District, Xuzhou City, Jiangsu Province
What are the energy-saving measures for using the dryer?
The dryer, also known as river sand dryer, yellow sand dryer and quartz sand dryer, is a drying equipment for handling large quantities of materials. And it has the characteristics of reliable operation, large operating flexibility and strong adaptability. River sand dryer is suitable for granular materials, especially for drying sand, river sand, quartz sand, etc. What are the power saving measures for sand dryer? Here, Xiaobian will talk to you briefly, hoping to help you in the daily use of the sand dryer.
Generally, the sand dryer is a drum type drying equipment. The drum dryer equipment is a relatively large power consumption equipment. If users take reasonable power saving measures, they can save a lot of production costs. The general power consumption of the dryer is the power of the motor multiplied by 3/4. Dryers are almost two fans. Multiply the power of the equipment fan by two times the time by three quarters, and then add the fan and motor together to get the total power consumption of the dryer equipment. Frequency converter can be added to control the speed of fan and motor to save power.
The spiral conveying blade at the material end is improved to remove the triangular rib plate. A 6mm steel plate can be used to make a short right angle with the same height as the feed end retaining ring. It is firmly welded with the inner cylinder of the dryer, and a circle is welded at an interval of 50mm to form a conical propeller naturally, which plays a role in slowing down the flow rate of materials in the high-temperature belt, improving the heat exchange rate and reducing the temperature of the front end of the dryer.
The sand dryer has an L-shaped lifting plate at about 1/3 of the cylinder length at low temperature. Generally, the lifting plate is fixed vertically at 90 ° C, and the circumference can be welded at 30 °, 90 °, and 120 ° in turn. In this way, the heat exchange rate can be high through the rotation of the dryer blade.
